How To Connect Canon Ts3122 Printer To Wifi Without Wps In 2023

(doylc.com) - How To Connect Canon Ts3122 Printer To Wifi Without Wps In 2023

Introduction

Setting up a printer can be a real challenge if you don’t know the right steps to take. It can become even more difficult if you don’t have a working WPS button on your router. In this article, we discuss how to connect a Canon TS3122 printer to wifi without WPS in 2023. We will also provide a few tips on how to troubleshoot any issues that may arise during the setup process.

Steps To Connect Canon TS3122 Printer To Wifi Without WPS

If you don’t have a WPS button on your router, you will have to take a few extra steps to get your Canon TS3122 printer connected to wifi. Here are the steps you need to follow:

• First, you will need to connect your printer to your computer with a USB cable.
• Next, you will need to install the printer drivers on your computer.
• Once the drivers have been installed, you will need to open the printer settings on your computer.
• From the printer settings, you will then need to select the ‘Wireless Setup’ option.
• The Wireless Setup option will then prompt you to enter the SSID (network name) and password for your router.
• Once you have entered the information, the printer will attempt to connect to your wireless network.
• In the event that the printer is unable to connect, you will need to manually enter the IP address for your router.
• After entering the IP address, the printer should be successfully connected to your wifi network.

Troubleshooting

If the printer is unable to connect to your wifi network, there are a few things you can try. Firstly, you can try restarting your router and printer. This may help resolve any software-related issues that may be preventing the connection. If this doesn’t work, you can try resetting the network settings on the printer. You can do this by pressing and holding the power button on the printer for 10 seconds. This will reset all the settings and allow you to start the setup process again.

Conclusion

As you can see, it is possible to connect a Canon TS3122 printer to wifi without the use of a WPS button. By following the steps outlined in this article, you should be able to get your printer connected to your wifi network with relative ease. However, if you have any issues, you can always refer to the troubleshooting section for some helpful tips.